However, once railroads began to operate and move people rapidly across great distances, time became much more critical. In the early years of the railroads, the schedules were very confusing because each stop was based on a different local time. The standardization of time was essential to efficient operation of railroads.
In 1878, Canadian Sir Sanford Fleming proposed the system of worldwide time zones that we use today. He recommended that the world be divided into twenty-four time zones, each spaced 15 degrees of longitude apart. Since the earth rotates once every 24 hours and there are 360 degrees of longitude, each hour the earth rotates one-twenty-fourth of a circle or 15� of longitude. Sir Fleming\'s time zones were heralded as a brilliant solution to a chaotic problem worldwide.
United States railroad companies began utilizing Fleming\'s standard time zones on November 18, 1883. In 1884 an International Prime Meridian Conference was held in Washington D.C. to standardize time and select the Prime Meridian. The conference selected the longitude of Greenwich, England as zero degrees longitude and established the 24 time zones based on the Prime Meridian. Although the time zones had been established, not all countries switched immediately. Though most U.S. states began to adhere to the Pacific, Mountain, Central, and Eastern time zones by 1895, Congress didn\'t make the use of these time zones mandatory until the Standard Time Act of 1918.
Today, many countries operate on variations of the time zones proposed by Sir Fleming. All of China (which should span five time zones) uses a single time zone - eight hours ahead of Coordinated Universal Time (known by the abbreviation UTC - based on the time zone running through Greenwich at 0� longitude). Russia adheres to its designated time zones although the entire country is on permanent Daylight Saving Time and is an hour ahead of their actual zones. Australia uses three time zones - its central time zone is a half-hour ahead of its designated time zone. Several countries in the Middle East and South Asia also utilize half-hour time zones.
Since time zones are based on segments of longitude and lines of longitude narrow at the poles, scientists working at the North and South Poles simply use UTC time. Otherwise, Antarctica would be divided into 24 very thin time zones!
Time zones have recently been given standard capital-letter abbreviations as follows:
UTC Coordinated Universal Time GMT Greenwich Mean Time, defined as UTC BST British Summer Time, defined as UTC+1 hour IST Irish Summer Time, defined as UTC+1 hour WET Western Europe Time, defined as UTC WEST Western Europe Summer Time, defined as UTC+1 hour CET Central Europe Time, defined as UTC+1 CEST Central Europe Summer Time, defined as UTC+2 EET Eastern Europe Time, defined as UTC+2 EEST Eastern Europe Summer Time, defined as UTC+3 MSK Moscow Time, defined as UTC+3 MSD Moscow Summer Time, defined as UTC+4 AST Atlantic Standard Time, defined as UTC-4 hours ADT Atlantic Daylight Time, defined as UTC-3 hours NST Newfoundland Standard Time, defined as UTC-3.5 hours NDT Newfoundland Daylight Time, defined as UTC-2.5 hours EST Eastern Standard Time, defined as UTC-5 hours EDT Eastern Daylight Saving Time, defined as UTC-4 hours CST Central Standard Time, defined as UTC-6 hours CDT Central Daylight Saving Time, defined as UTC-5 hours MST Mountain Standard Time, defined as UTC-7 hours MDT Mountain Daylight Saving Time, defined as UTC-6 hours PST Pacific Standard Time, defined as UTC-8 hours PDT Pacific Daylight Saving Time, defined as UTC-7 hours HST Hawaiian Standard Time, defined as UTC-10 hours AKST Alaska Standard Time, defined as UTC-9 hours AKDT Alaska Standard Daylight Saving Time, defined as UTC-8 hours AEST Australian Eastern Standard Time, defined as UTC+10 hours AEDT Australian Eastern Daylight Time, defined as UTC+11 hours ACST Australian Central Standard Time, defined as UTC+9.5 hours ACDT Australian Central Daylight Time, defined as UTC+10.5 hours AWST Australian Western Standard Time, defined as UTC+8 hoursGiven the current time in one time zone, you are to compute what time it is in another time zone. The first line of input contains N, the number of test cases. For each case a line is given with a time, and 2 time zone abbreviations. Time is given in standard a.m./p.m. format with midnight denoted "midnight" and noon denoted "noon" (12:00 a.m. and 12:00 p.m. are oxymorons). Assuming the given time is the current time in the first time zone, give the current time in the second time zone.
Note: Standard am/pm notation means times are in this order: midnight, 12:01 a.m., ... 11:59 a.m. , noon, 12:01 p.m. .... 11:59 p.m, midnight, and so on
4 noon HST CEST 11:29 a.m. EST GMT 6:01 p.m. CST UTC 12:40 p.m. ADT MSK
midnight 4:29 p.m. 12:01 a.m. 6:40 p.m.